Holder C270 - Cargo bed subframe

Maintenance Instructions C250 ... C370
232 Translation of Original Operating Manual 156319-04
4. Lift only until the wheel to be changed is no
longer in contact with the ground.
5. Carefully remove the wheel nuts (3), holding
the wheel (6) in place.
CAUTION
Risk of injury
The wheel has a weight corresponding
to its size.
6. When all nuts have been removed, replace
the wheel.
7. Reattach all wheel nuts hand-tightly.
8. Lower jack (5). When the wheel is again in
contact with the ground, tighten the wheel
nuts crosswise with a torque of 215 Nm.
9. Check the air pressure.
Cargo bed subframe
C270_098
Secure the raised cargo bed (sub-frame) addition-
ally against inadvertent lowering.
CAUTION
Danger of accident
Working under the raised body frame
is permitted only with additional sup-
port put into place.