Holder C270 - Front and rear attachments or combinations

Attachments C250 ... C370
Translation of Original Operating Manual 156319-04 145
Front and rear attachments or combinations
1) Calculation of the minimum front ballasting G
V min
Enter the calculated minimum ballasting that is required in the front end of the vehicle into the table.
Front attachment
2) Calculation of the minimum rear ballasting G
H min
Enter the calculated minimum ballasting that is required in the rear end of the vehicle into the table (value
X for Holder vehicles 0.25 all-wheel).
3) Calculation of the actual front axle load T
V tat
If the necessary minimum front ballasting (G
V
) is not achieved with the front attachment(G
V
), the weight
of the front attachment must be increased to the weight of the minimum front ballasting!
Enter the calculated actual front axle load and the permissible front axle load specified in the operating
manual of the vehicle into the table.
4) Calculation of the actual total weight G
tat