Shut-down C250 ... C370
Translation of Original Operating Manual 156319-04 199
Shut-down
Leaving the vehicle
C270_159
1
2
1
3
Stop vehicle!
1. Lower the attachments completely.
2. Set parking brake.
3. Push in fine adjustment control (2) complete-
ly (idling position).
4. Set direction switch (1) to the neutral position
(centre).
5. Set drive programme switch (1) to 0.
ADVICE
Never shut off an overheated engine
(warning lamp (14) is lit and temper-
ature indicator (5) is in the red field).
Let the engine cool without a load at
1500 rpm before shutting it down, un-
til the warning light (14) has gone
out and the temperature indicator has
gone back to the green range. Do not
let the engine run without supervision!
After the cool-down phase check the
cooling system.