Special operation C250 ... C370
Translation of Original Operating Manual 156319-04 139
Stationary mode removal of oil
In stationary mode, hydraulic oil can also removed
via hydraulic couplings, e.g. for operating a hy-
draulic tipper.
Max. removal amount 12 l
ATTENTION
•
Take care that there is no mixture
with other types of hydraulic oil
from external devices
CAUTION
Danger of accident
•
Check the steering ability of the
hydraulic steering system after
stationary operation. To do this,
turn the steering wheel left and
right several times to a stop; this
bleeds the steering system
•
Check the hydraulic oil level before
beginning to drive
To Next Page
Loading...
