Holder C270 - Maintenance every 1000, 2000, 3000 operating hours

Maintenance schedule C250 ... C370
Translation of Original Operating Manual 156319-04 265
Maintenance every 1000, 2000, 3000 operating hours
Customer service at your Holder service partner necessary
Due Maintenance work
Maintenance
every 1000
operating
hours
•
Check engine valve clearance, adjust if necessary
•
Lubricate universal joints (at least 1x annually)
Maintenance
every 2000
operating
hours
•
Check injection pump and injection nozzles, replace if necessary
•
Change hydraulic oil, clean suction filter for the vehicle and working hydraulics, re-
place if necessary (first time after 500 operating hours, at least every 2 years)
•
Replace return flow filter for the vehicle hydraulics, implement servopump, volume
divider II (first time after 50 operating hours, at least every 2 years)
Maintenance
every 3000
operating
hours
•
Check injection pump and injection nozzles, replace if necessary
•
Examine the turbocharger
•
Replace coolant (at least every 2 years)