Holder C270 - Assemblies: Hydraulics

Technical Data C250 ... C370
42 Translation of Original Operating Manual 156319-04
Assemblies: Hydraulics
Assembly Additional
information
Description
Working hydraulics
- Pumps Sauer Danfoss
- Model SNP 2
- Delivery volume Hydr. pump 10.8 cm
3
(34 l/min at 2700 rpm) series
- Delivery volume Double pump (MT II) 8.4 + 19.2 cm
3
(25 + 59.5 l/min at 2.700 rpm) option
- Delivery volume GVP (implement
pump)
28 cm
3
(0 - 76 l/min at 2700 rpm) option
- Operating pressure Hydr. pump+MT II = 180 bar, implement pump = 250
bar
Hydraulic oil tank 35 l (shared oil tank for drive and working hydraulics)
Hydr. control valves Electrohydraulic proportional valves
Steering
- Type Hydrostatic with 2 steering cylinders, double-acting
- Steering valve Orbitrol OSPC 125 LS (single-stage), OSPD 125/205
(two-stage)
- Oil supply 35 l (shared oil tank for drive and working hydraulics,
and for steering)