Honeywell Experion LX User Manual

To call up the Event Archiving Operations display
1. Choose ViewEventsEvent Archiving.
2. You can now:
a. Archive the events by clicking the Archive Now button.
b. Check for tampering of event records.
c. Restore archived events by clicking the Restore button.
d. Remove restored archives by clicking the Remove button. The Remove button
appears when you have restored archives.
e. View the status of events collection and archiving.
Event collection and archive status
The Event Archiving Operations display shows the current event collection and archiving
status, as described in the following table.
Status Description
Event Archiving
status
Shows the current status of events collection and archiving. For a description
of each status see the table below.
Current event
rate
Hourly average calculated on the previous 24 hours. Is updated every hour.
Last archived The last date and time that an archive ran.
Next archive
scheduled for
The date and time of the next schedule archive. Calculated using the last
archive date and time and the configured schedule.
The following table describes each possible archive status.
Archivestatus Description
OK Event Archiving is working normally.
Overload
Events are occurring so frequently that Event Archiving is not able to capture
them in a timely way. If you see this status, refer the problem to your supervisor.
Failed Events collection has failed.
Full Disk
There is not enough disk space to continue events collection. Events collection is
stopped until there is sufficient disk space available.
Archiving events
Use the following procedure if:
Responding to events
Honeywell 2017 173

Honeywell Experion LX Specifications

General

Brand	Honeywell
Model	Experion LX
Category	Control Systems
Language	English