Honeywell Experion LX User Manual

For example, to request report '123'
1. Click the Command Zone.
2. Type rpt123 and press ENTER.
Viewing a report
The latest generated version of any report can be viewed on your screen at any time—just like
any other display.
Attention:
If you want to update the report's contents, you must request it again—see the
topic, “Requesting a reports”.
For example, to call up report '123'
1. Click the Command Zone.
2. Type pr 123 and press ENTER.
Standard report types
The following table lists standard report types supplied with Experion. Your system will only
have report types that are applicable to your system's needs and your licensed options.
Reporttype Description
Alarm and
Event
Lists the alarms or events that occurred within the specified time period. This
report enables you to analyze alarms and events that occurred during a specified
time span on specific points.
Alarm and
Event DSA
Lists alarm and event details from servers within a DSA. This report enables you
to analyze alarms, alerts, and events that occurred during a specified time span on
local and remote points on multiple servers.
Alarm
Duration
Lists how long the specified points were in an alarm condition over a given time
period.
Asset Alarm
Count
Report
Lists the number of alarms on particular assets and the priority of those alarms.
This report can be configured to generate alarm counts for assets within the SOR
of either the user who is currently logged on or (if you are logged on at MNGR
level) another specified user.
Batch
Batch reports are used to collect history for a set of points and events for an asset
for the duration of a production run.
Producing reports
Honeywell 2017 300

Honeywell Experion LX Specifications

General

Brand	Honeywell
Model	Experion LX
Category	Control Systems
Language	English