5. Click the Load button.
The Recipe Last Loaded, With Scale and To Unit boxes are updated when the
recipe is loaded.
Customizing a recipe
In some cases you may need to customize a recipe before loading it. For example, if the
recipe controls the production of fertilizer, you may need to scale down the recipe so that it
makes the correct amount of fertilizer. Alternatively, you may need to override some of the
recipe's master values for the particular task you are about to perform.
To scale a recipe
1. Click the Scale box and type the scale percentage.
100% uses the master values, whereas 50% halves them. Note that scaling only affects
the parameters for which Scaled is set to Yes.
To override one or more master values
1. Select the appropriate Working box and type the appropriate value. (This value must
be between the minimum and maximum values.)
Repeat this for any other working values you want to change.
Loading recipes
Honeywell 2017 289
To Next Page
Loading...
Need help?
General
