Attention:
When tabbed displays are enabled, less screen real estate is available to the display
called up in Station. This means that in systems where Station is configured for
100% zoom level, scroll bars will appear in the display. For this reason, “Zoom
To Fit” is generally recommended to avoid the need for scrolling.
Navigating between tabbed displays
n To move between tabs, click on the tab with the display you want to view.
Opening and closing tabbed displays
To open a display in a new tab
n Before opening a new display, either:
l
Click the > button to show the outline of a new tab with the text “Next Display,” or
l
Right-click on any tab and choose Next Display in Tab.
Attention:
If the “Next Display” tab is visible but the next display you call up is
already managed in a tab, the existing tab will become selected. The
“Next Display” tab remains visible until you click it again (closing it) or
until the next unique display is called up.
To open a display in an existing tab
1. Make sure that the > button is visible.
If the “Next Display” tab outline is visible, click it to change it to the > button.
Using displays
Honeywell 2017 45
To Next Page
Loading...
Need help?
General
