2. Click the drop-down arrow for each command to view the valid command options for
this batch or procedure.
3. Select an option from the CMD, MD, or MD ATTR control to send that command to
the controller for this batch or procedure.
To interact with a confirmable instruction from an activity detail display
1. From the Activity Detail display, click the Table View tab to display any confirmable
instructions for this batch or procedure.
2. Select the respective check box to confirm a construction has been completed.
Accessing child elements
A child recipe, or element, is one of the recipes in two consecutive layers in layered recipes.
The child is the recipe at the lower level, and is controlled by the <parent> recipe above it.
The parent/child concept in a layered recipe is completely different from the parent/child
relationship in the user defined template function.
To access a child element
1. Select a batch or procedure from the summary display.
2.
Click on Detail Display to display the Activity Detail display for the selected item.
Activity Detail display
a. Click the Active Phases tab to display the child elements for this batch or pro-
cedure.
b. Select a child element to command it using the faceplate controls.
Responding to child element errors
Errors encountered by child elements are displayed against the parent in the Activity, Batch,
or Procedure Summary display.
To respond to child element errors
1. From the Summary display, select the batch or procedure that has an error indicated in
either the Status or Status Description columns.
2. Click F12 to access the Activity Detail display.
Operating a batch or procedure
Honeywell 2017 284
To Next Page
Loading...
Need help?
General
