Honeywell Experion LX User Manual

To monitor batch or procedure progress from an activity detail display
1. From the Activity Detail display, you can monitor the following:
l
Status
l
Phases
l
Execution state
l
Command, mode, and mode attribute current value and options
l
Parameter values
2. Use the options provided to change values for the batch or procedure as required. The
other tabs in this display provide additional information about the batch or procedure
and its associated SCM, RCM or UCM.
To change batch or procedure parameters from an activity detail display
1. From the Activity Detail display, review the batch or procedure parameters and determ-
ine which ones need to be modified.
2. Type the new parameter values in the field provided and press Enter to submit the
change to the controller.
To adjust formula parameters from an activity detail display
1. From the Activity Detail display, click the Formula tab to display the formula para-
meters for this batch or procedure.
2. Type new values for the parameters as required and press Enter to submit the changes
to the controller.
To review report parameters from an activity detail display
1. From the Activity Detail display, click the Reports tab to display the report parameters
for this batch or procedure.
2. Type new values for the parameters as required and press Enter to submit the changes
to the controller.
To command a batch or procedure from an activity detail display
1. From the Activity Detail display, review the current values for each of the command
options in the faceplate to the left of the display.
Operating a batch or procedure
Honeywell 2017 283

Honeywell Experion LX Specifications

General

Brand	Honeywell
Model	Experion LX
Category	Control Systems
Language	English