Honeywell Experion LX User Manual

To change to the default level from a higher level
1. In the Command Zone type bye and press ENTER.
Understanding security levels
Your security level determines which tasks you are permitted to perform. Note, however, that
even if you are allowed to perform a particular task you may be prevented from performing it
in certain circumstances.
If you attempt to perform a task that requires a higher security level, the following message
appears in the Message Zone:
Higher Security Level Required
Your security level appears at the right of the Status Bar. The levels are, from lowest to
highest: View Only, Ack Only, OPER, SUPV, ENGR and mngr.
Changing Station's setup file
Station automatically uses default.stn unless you select another setup file. Use this procedure
if you want to use a setup file other than default.stn.
To select another Station setup file
1. Choose StationConnect.
The Connect dialog box opens.
2. Select the appropriate configuration file from the Recent Connections tab or the Other
Connections tab.
The Recent Connections tab contains a list of setup files (.stn) most recently used. The
Other Connections tab lists all your setup files. If your setup file is not listed, click the
Browse button to navigate the required setup file.
3. Click Connect.
Changing the Asset Profile of a Station or a Console
Depending on a system’s configuration it may be possible to change the scope of
responsibility (SOR) of a Flex Station or a Console Station by assigning a different asset
profile. This functionality can be used to enable an operator to, for example, temporarily
change their Station’s SOR to assist another operator during a period of high alarm activity.
Understanding the basics
Honeywell 2017 23

Honeywell Experion LX Specifications

General

Brand	Honeywell
Model	Experion LX
Category	Control Systems
Language	English