COMMISSIONING
166 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
HCM - GPU Module
Figure 7-28 HCM-GPU Screen
Open the Engauge tool from the PC where enguage is installed. Right
click on HCM-GPU card.Select Commissioning.
To read the current data of this TAB sheet, press the Read button.
Instead, you can also select to press the Read All button available when
extending the read function by the arrow at the right side of the read
button). Then the current data of all TAB sheets are read.
The TAB sheet Status gives information about the health of the HCM-
GPU module (Refer to "HCM-GPU Status").
The TAB sheet Generic gives information on the installed software
version and from there two commands can be given.
To Next Page
Loading...
