Honeywell FlexLine SmartServo 954 - Interface 2 Level

COMMISSIONING
Part No.: 4417340 Revision 1 Service Manual 73
954 SmartServo FlexLine
7.3.4.7 Interface 2 level
Name Value Range Default Value Explanation
[Primary value]
Shows the
(dipped/searched)
interface 2 level as an
innage value.
Fields, see product
level
[Primary value gain]
See product level
[Primary value offset]
See product level
[Secondary value]
Shows the
(dipped/searched)
interface 2 level as an
ullage value.
Fields, see product
level
[High high alarm]
[High alarm]
[Low alarm]
[Low low alarm]
[Alarm hysteresis]
See product level
[Alarm test enable]
See product level
[Alarm test]
See product level
[Kill measurement]
See product level
[Manual overwrite]
See product level
[Resurrect]
See product level
[Manual overwrite status]
See product level