SYSTEM ARCHITECTURE
Part No.: 4417340 Revision 1 Service Manual 19
954 SmartServo FlexLine
The commissioning parameters and the diagnostics data are stored
when the power is switched off.
 Jumpers:
With the jumpers, specific hardware settings can be made:
Jumper
Number
Function
1 All warning and monitoring-related commissioning entities
a
are
protected and cannot be changed
2 The password is protected from being read
3 All commissioning entities are protected and cannot be changed
4 Board-specific jumper
5 Board-specific jumper
a) For an explanation of the entities concept, see section 0
To Next Page
Loading...
Need help?
General
