Honeywell FlexLine SmartServo 954 User Manual

COMMISSIONING
74 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
7.3.4.8 Density
Name Value Range Default Value Explanation
[Primary value]
Shows the calculated
density value after a
density profile or tank
profile command.
Fields, see product
level
[Primary value gain]
See product level
[Primary value offset]
See product level
[Secondary value]
N.A.
[High high alarm]
[High alarm]
[Low alarm]
[Low low alarm]
[Alarm hysteresis]
See product level
[Alarm test enable]
See product level
[Alarm test]
See product level
[Kill measurement]
See product level
[Manual overwrite]
See product level
[Resurrect]
See product level
[Manual overwrite status]
See product level
[Density data]
During a density
measurement, a
maximum of 50
density/level points will
be presented with the
following fields:
<index> the
density/level point
number.
<density status byte>
<density value>
<level status byte 1>
<level status byte 2>
<level value>
(status bytes according
to items [D0] and [R0])

Honeywell FlexLine SmartServo 954 Specifications

General

Brand	Honeywell
Model	FlexLine SmartServo 954
Category	Measuring Instruments
Language	English