Honeywell FlexLine SmartServo 954 - Level Screen with Different Level Type; Level Screen with Tenth Millimeter Selection as Disable

COMMISSIONING
Part No.: 4417340 Revision 1 Service Manual 203
954 SmartServo FlexLine
Level Screen with different Level Type
The below table shows how the level screens appear when different
Level type is configured using Engauge or HART SmartView.
Level Type Screen
Innage
Ullage
Level Screen with Tenth Millimeter selection as Disable
The below screen shows how the level value will appear when the
Tenth Millimeter Selection units entity is configured as “Enable/Disable”
using Engauge or HART SmartView.
Tenth Millimeter
selection
Screen
Enable
Disable