Honeywell FlexLine SmartServo 954 User Manual

COMMISSIONING
176 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
11. Check the Firware version is correct, and if you want to
reset board and Novram you can reset using this tab.
12. Open the machine where Engauge tool is installed.
13. Create new site. Refer Installation and Operation Manual
Engauge 2.6 - Professional.
14. Add device. Refer Installation and Operation Manual
Engauge 2.6 Professional.
15. Add field connector. See Installation and Operation Manual
Engauge 2.6 - Professional.
16. Add Tank. See Installation and Operation Manual Engauge
2.6 - Professional.
17. Add gauge. See Installation and Operation Manual Engauge
2.6 - Professional.
18. Scan the field for connected instruments and field
connectors (interfaces).
19. Add the GPU and Flexconn address in the Engauge tool.

Honeywell FlexLine SmartServo 954 Specifications

General

Brand	Honeywell
Model	FlexLine SmartServo 954
Category	Measuring Instruments
Language	English