COMMISSIONING
Part No.: 4417340 Revision 1 Service Manual 67
954 SmartServo FlexLine
Name Value Range Default
Value
Explanation
[Sales code]
< 32 char’s >
< 32 ‘-‘ >
In production /
commissioning the sales
code can be set and can
here also be read.
[Device serial number]
In production the device
serial number can be set
and can here be read.
[Production date]
In production the
production date can be
set and can here be read.
[Drum serial number]
In production /
commissioning the drum
serial number can be set
and can here also be
read.
[Device tamper
counter
<0.0>
Shows how many times a
‘user’ tried to change a
setting when the ‘protect
all entities jumper’ is
active.
[Device tamper date
and time]
<all 0>
Shows the last 10 time
stamps when the device
tamper was detected.
[W&M tamper counter]
<0.0>
Shows how many times a
‘user’ tried to change a
setting when the ‘Protect
W&M entities jumper’ is
active.
[W&M tamper date
and time]
<all 0>
Shows the last 10 time
stamps when the W&M
tamper was detected.
[Actual acceleration]
<all 0>
Shows the actual x-, y-, z-
axis acceleration values
of this sensor.
[Maximum
acceleration]
<all 0>
Shows the maximum x-,
y-, z-axis acceleration
values of this sensor.
[Minimum
acceleration]
<all 0>
Shows the minimum x-, y-
, z-axis acceleration
values of this sensor.
[Proto board] <true>
<false>
<false>
Determines whether this
servo board is a prototype
board. Important for
hardware version
detection.
To Next Page
Loading...
Need help?
General
