Honeywell FlexLine SmartServo 954 - Page 79

COMMISSIONING
Part No.: 4417340 Revision 1 Service Manual 71
954 SmartServo FlexLine
7.3.4.5 Water level
Name Value Range Default Value Explanation
[Primary value]
Shows the
(dipped/searched)
water level (I3
interface) as an innage
value.
Fields, see product
level
[Primary value gain]
See product level
[Primary value offset]
See product level
[Secondary value]
Shows the
(dipped/searched)
water level (I3
interface) as an ullage
value.
Fields, see product
level
[High high alarm]
[High alarm]
[Low alarm]
[Low low alarm]
[Alarm hysteresis]
See product level
[Alarm test enable]
See product level
[Alarm test]
See product level
[Kill measurement]
See product level
[Manual overwrite]
See product level
[Resurrect]
See product level
[Manual overwrite status]
See product level