HP 1920 Gigabit Ethernet Switch Series User Manual

342
Figure 317 Configuration progress dialog box
e. After the configuration process is complete, click Close.
3. Configure AAA authorization method for the ISP domain:
a. Click the Authorization tab.
b. Select test from the Select an ISP domain list.
c. Select Default AuthZ, select the authorization method RADIUS from the Default AuthZ list, and
select the authorization scheme system from the Name list, as shown in Figure 318.
Figure 318 Configuring the AAA autho
rization method for the ISP domain
d. Click Apply.
A configuration progress dialog box appears.
e. After the configuration process is complete, click Close.
4. Configure AAA accounting method for the ISP domain:
a. Click the Accounting tab.
b. Select test from the Select an ISP domain list.
c. Select Default Accounting, select the accounting method RADIUS as the default accounting
method, and select the accounting scheme system from the Name list, as shown in Figure 319.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English