HP 1920 Gigabit Ethernet Switch Series - Page 426

413
Figure 397 Configuring a RADIUS authentication server
3. Configure the primary accounting server in the RADIUS scheme:
a. In the RADIUS Server Configuration area, click Add.
b. Configure the primary accounting server:
− Select the server type Primary Accounting.
− Enter the IP address 10.1.1.2, and enter the port number 1813.
− Enter expert in the Key field and the Confirm Key field.
c. Click Apply.
Figure 398 Configuring a RADIUS accounting server
4. On the RADIUS configuration page, click Apply.