195
Figure 201 Specifying a DNS server address
Configuring the DNS client (Router B)
1. Enable dynamic domain name resolution:
a. From the navigation tree, select Advanced > DNS Setup > DNS Configuration to enter the
configuration page, as shown in Figure 202.
b. Selec
t Enable for Dynamic DNS.
c. Click Apply.
Figure 202 Enabling dynamic domain name resolution
2. Specify the DNS server address:
a. Click Add IP to enter the page as shown in Figure 203.
b. Enter 2.1.
1.2 in DNS Server IP Address.
c. Click Apply.
To Next Page
Loading...
