HP MSR SERIES User Manual

372
Figure 369 Adding a local user
2. Enable L2TP:
a. Select VPN > L2TP > L2TP Config from the navigation tree.
The L2TP configuration page appears, as shown in Figure 370.
b. Selec
t the box before Enable L2TP.
c. Click Apply.
Figure 370 Enabling L2TP
3. Modify the PPP authentication method of the ISP domain system:
a. On the L2TP configuration page, click Add to enter the L2TP group configuration page.
b. Select CHAP as the PPP authentication method.
c. Select ISP domain system (the default ISP domain).
d. Click the Modify button of the ISP domain.
The ISP domain modification page appears, as shown in Figure 371.
e. On the page, sele
ct the server type Local as the primary PPP authentication method.
f. Click Apply to return to the L2TP group configuration page.

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing