HP MSR SERIES User Manual

438
c. Click Add to enter the host resource configuration page.
d. Enter the resource name sec_srv.
e. Click the Add button under the Network Services list.
f. On the page that appears, as shown in Figure 453, enter the destination IP address
10.
153.2.0, enter the subnet mask 24, select IP as the protocol type, specify the description
information as 10.153.2.0/24, and click Apply.
The network service is added to the host resource.
g. Click the Add button under the Shortcuts list.
h. On the page that appears, as shown in Figure 454, ent
er the shortcut name ftp_security-server
and the shortcut command ftp 10.153.2.25, and click Apply.
The shortcut is added to the host resource. Now, the host resource configuration page is as
shown Figure 455.
i. Cli
ck Apply.
Figure 453 Adding a network service to the host resource
Figure 454 Adding a shortcut to the host resource

HP MSR SERIES Specifications

General

Product Series	MSR Series
Manufacturer	HP
Category	Network Router
Ports	Varies by model
WAN Interfaces	Varies by model
LAN Interfaces	Varies by model
VPN Support	Yes
Firewall	Yes
Dimensions	Varies by model
Weight	Varies by model
Wireless Support	Varies by model
Management	Web-based, CLI
Power Supply	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing