HP MSR SERIES - Page 693

676
5. Enter 1 for Server Group ID.
6. Enter 1 for Server ID.
7. Enter 10.1.1.2 for Server Address.
8. Click Add the Server.
9. Click Apply.
# Create SIP trunk account 1 with the host username 2000, and associate the account with SIP server
group 1.
10. Select Voice Management > SIP Trunk Management > Account Management from the navigation
tree, and click Add.
Figure 705 Configuring a SIP trunk account
11. Enter 1 for Account ID.
12. Select server-group-1 from the SIP Server Group for Registration list.
13. Enter 2000 for Host Username.
14. Select Enable for Registration Function.
15. Click Apply.
# Configure the call route for the outbound calls from private network user 2000 to public network user
1000 by binding SIP server group 1 to the VoIP voice entity.
16. Select Voice Management > SIP Trunk Management > Call Route from the navigation tree, and
click Add.