HP V1910 Switch Series User Manual

338
Figure 309 Configure the AAA accounting method for the ISP domain
 Select the domain name test.
 Select the Accounting Optional checkbox, and then select Enable for this parameter.
 Select the Default Accounting checkbox and then select RADIUS as the accounting mode.
 Select system from the Name drop-down list to use it as the accounting scheme.
 Click Apply. A configuration progress dialog box appears.
 After the configuration process is complete, click Close.
4. Configure an ACL.
# Create ACL 3000 that denies packets with destination IP address 10.0.0.1.
 From the navigation tree, select QoS > ACL IPv4 to enter the IPv4 ACL configuration page, and then
select the Create tab.
Figure 310 Create ACL 3000
 Enter 3000 as the ACL number.

HP V1910 Switch Series Specifications

General

Product Series	V1910
VLAN Support	Yes
QoS	Yes
Ports	8, 24, or 48 10/100/1000 ports
MAC Address Table Size	8K entries
Power Supply	Internal power supply
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (non-condensing)