Inertial Labs INS-P User Manual

INS
GUI User’s Manual
Inertial Labs, Inc
TM
Address: 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 U.S.A.
Tel: +1 (703) 880-4222, Fax: +1 (703) 935-8377 Website: www.inertiallabs.com
165
14. Choice of 3D model for visualization of the INS
orientation
The INS GUI software allows to use different 3D models for visualization of
the INS orientation angles when “INS visualization” item from the “Run”
menu is used for work with the INS.
The default 3D model is an aircraft as Fig. 5.1 shows. Other models are on
Flash Drive in the subfolder “3D_Models” of folder with the INS GUI
software. There are files model.mgl which contain these models and
appropriate screenshot files.
To set desirable 3D model for the INS visualization, just copy the file
model.mgl from appropriate folder of 3D models to the “configs” subfolder in
folder with INS GUI software. At this you should replace existing file. Some
examples of 3D models for the INS visualization are shown on Fig. 14.1.
Helicopter
Ferrari_F40
Vessel
Submarine
Fig. 14.1

Inertial Labs INS-P Specifications

General

Brand	Inertial Labs
Model	INS-P
Category	Car Navigation system
Language	English