EasyManuals Logo

Inertial Labs INS-P User Manual

Inertial Labs INS-P
251 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #166 background imageLoading...
Page #166 background image
INS
GUI User’s Manual
Inertial Labs, Inc
TM
Address: 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 U.S.A.
Tel: +1 (703) 880-4222, Fax: +1 (703) 935-8377 Website: www.inertiallabs.com
166
15. Troubleshooting
15.1. How to repair the INS parameters
Need to repair of the INS parameters appears in some cases, for example at
incorrect loading of parameters into the INS memory.
You can use original file with .prm extension that comes on the Flash Drive
within a delivery package of the Inertial Labs INS, or use own files created
by Save parameters command (if these files contain valid data of course).
Follow next steps to restore INS parameters.
1. Connect the INS to PC and power it.
2. Start the INS GUI software. The main menu will appear (see Fig. 3.1).
3. Select Test options…” from the Options menu (or click button)
see Fig. 3.7. Test options window (Fig. 4.1) will open.
4. Select the correct СОМ port number and its rate Baud rate:115200.
Click ОК.
Note. For the number of the СОМ port to which the INS is connected, see section
2Installation of drivers and configuration of PC parameters and “Appendix А. Installation
of the COM-to-USB converter drivers and configuration of the PC parameters.
5. Select Restore parameters in the Parameters menu (see Fig. 3.4)
or click button. A standard Windows Open window will open.
6. Select file with extension .prm containing the factory settings of the INS
parameters or own file created by Save parameters command (if this file
contains valid data of course). Click ОК. These parameters will be loaded
into INS memory automatically.
15.2. What do you have to do at strange behavior of the INS
If you see strange behavior of the INS, first check whose parameters are
loaded in the connected INS. This may occur, for example, if you have
restored parameters that correspond to another INS with not proper serial
number. Please use “Restore parameters…” command accurately to avoid
wrong parameters loading into the INSs memory.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Inertial Labs INS-P and is the answer not in the manual?

Inertial Labs INS-P Specifications

General IconGeneral
BrandInertial Labs
ModelINS-P
CategoryCar Navigation system
LanguageEnglish