Inertial Labs INS-P User Manual

INS
GUI User’s Manual
Inertial Labs, Inc
TM
Address: 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 U.S.A.
Tel: +1 (703) 880-4222, Fax: +1 (703) 935-8377 Website: www.inertiallabs.com
105
Fig. 10.3
10.2.2. Control of GNSS receiver model
The Inertial Labs
TM
INS contains the NovAtel GNSS receiver inside. NovAtel
uses the term “models” to refer to and control different levels of functionality
in the GNSS receiver firmware. For example, user can purchase INS with
the base model of the GNSS receiver which has an L1 only capability. At a
later time he can easy upgrade this receiver to a more feature intensive
model, like L1/L2 dual-frequency. All that is required to upgrade is an
authorization code for the higher model and the INS GUI to enter this code
to the receiver. Reloading of the INS or GNSS receiver firmware or returning
the INS for service to upgrade the model is not required.
See http://www.novatel.com/assets/Documents/Papers/NovAtelModels.pdf
for information about available models for OEM615 NovAtel GNSS receiver.

Inertial Labs INS-P Specifications

General

Brand	Inertial Labs
Model	INS-P
Category	Car Navigation system
Language	English