Inertial Labs INS-P User Manual

INS
GUI User’s Manual
Inertial Labs, Inc
TM
Address: 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 U.S.A.
Tel: +1 (703) 880-4222, Fax: +1 (703) 935-8377 Website: www.inertiallabs.com
104
Fig. 10.2
Step 4. When type of correction “AUTO” or “DGPS” is chosen it is
necessary to set correct baud rate of the COM Port wich provides GNSS
corrections in the “COM port bps” field. User can choose needed COM Port
baud rate in the drop-down list (see Fig. 10.3). Default value is “115200”.
Step 5. Click “OK” to send changed settings to the INS.
Important note: it is necessary to power off / on the INS after changing any of
parameters in GNSS Correction field to restart the GNSS receiver with new settings.

Inertial Labs INS-P Specifications

General

Brand	Inertial Labs
Model	INS-P
Category	Car Navigation system
Language	English