4 - 58
HAPSITE ER Operating Manual
4.7.1.7.4 NET Button
The NET button provides the IP address for HAPSITE ER and the Subnet mask.
This will be used when using the wireless connection on the Laptop. See Chapter
5, Communications and Touch Screen Options. (See Figure 4-99.)
Figure 4-99 NET Button
4.7.2 Attachments
The Attachments option on the STATUS Menu displays information regarding
the current sampling configuration of the HAPSITE ER ( Air Probe, Headspace,
etc.). If the Air Probe is installed, an icon of the probe will be displayed. Touching
the PROBE icon will display the installed version of the probe’s firmware. (See
Figure 4-100.)
Figure 4-100 Probe Icon
If the Service Module is installed, the Service Module icon will be shown. Touching
the Service Module icon will display the installed version of the service module’s
firmware and the turbo speed of the service module’s pump. Options for attaching
and detaching the service module can be found through this screen. For more
information on the service module, see the Service Module Manual.
To Next Page
Loading...
