10 - 7
HAPSITE ER Operating Manual
ER_Air_Tenax_PPB_Standard . . . VOC and Chemical Warfare Agent Air
Analysis using Tenax Concentrator (10
minute analysis sample time. Consists of 1
minute inlet purge plus one minute sample
collection.)
ER_Air_Loop_PPM_Standard . . . . VOC and Chemical Warfare Agent analysis
using Sample Loop (10 minute analysis time)
ER_HSS_Tri-Bed_PPT_Standard . VOC and Chemical Warfare Agent
Headspace solid/liquid analysis using the
Tri-Bed concentrator (10 minute analysis
time)
ER_HSS_Loop_PPB_Standard . . . VOC and Chemical Warfare Agent
Headspace solid/liquid analysis using the
Sample Loop(10 minute analysis time)
ER_HSS_Tenax_PPT_Standard . . VOC and Chemical Warfare Agent
Headspace solid/liquid analysis using the
Tenax concentrator (10 minute analysis time)
ER_SP_Tri-Bed_PPT_Standard . . VOC water analysis using the Tri-Bed
concentrator (10 minute analysis time)
ER_SP_Loop_PPB_Standard . . . . VOC water analysis using the Loop
concentrator (10 minute analysis time)
ER_SP_Tenax_PPT_Standard. . . . VOC water analysis using the Tenax
concentrator (10 minute analysis time)
ER Survey . . . . . . . . . . . . . . . . . . . . Quick screening method for VOCs. (Analysis
time is determined by the user. Method will
turn off after 5 minutes.)
10.4 Description Page
The first page displayed in the Method Editor is the Description page (Figure
10-9). This page will appear after clicking Open, HAPSITE Method and HAPSITE
Default Method. A description of the method and the method name can be entered
into this screen. A temperature profile with the inlet states is displayed at the bottom
of all of the method pages.
NOTE: A method file ends with a file extension of .mth.
To Next Page
Loading...
