Inficon HAPSITE ER - Startup Page

10 - 11
HAPSITE ER Operating Manual
10.5 Startup Page
The Startup page, displayed in Figure 10-12, displays the initial settings for the
HAPSITE ER system heaters. The initial temperature settings for the components
described in HAPSITE Temperatures (C) can be modified on this page. The
Sample Input Device (i.e., Probe, Headspace, SituProbe or SPME) can be
selected on this page.
Figure 10-12 Method Editor Startup Page for Survey Methods
The parameters on the Startup page are:
HAPSITE Temperatures (C)
Column . . . . . . . . . . . . . . . . . . . . . . The initial Column temperature setting
Membrane . . . . . . . . . . . . . . . . . . . . The target Membrane temperature setting.
Valve Oven . . . . . . . . . . . . . . . . . . . The target Valve Oven temperature setting.
Probe . . . . . . . . . . . . . . . . . . . . . . . . The target Probe temperature setting. This
setting is not available when the Headspace
or SituProbe is enabled.