8 - 31
HAPSITE ER Operating Manual
6 Each identification has a drop-down menu. Five hits will be displayed in each
menu. (See Figure 8-62.)
Figure 8-62 Drop-Down Menu
7 Check the Search in AMDIS box. The software will search the peaks using the
AMDIS library. The AMDIS identification will be located in the drop-down menu
below the NIST hits.
NOTE: This is not a true AMDIS search. AMDIS will not search the entire
chromatogram. It will only search the peaks that NIST has located.
8.7.0.1 Show/Update Current Peaks Window Description
In the chromatogram beneath the Show/Update Current Peaks window, each
detected peak will be labeled with a black triangle. Pink dots will appear at the base
of each peak. These dots are used to determine the peak area. (See Figure 8-63.)
Figure 8-63 View Beneath the Window
To Next Page
Loading...
