3 - 17
HAPSITE ER Operating Manual
2 Plug the battery charger into a grounded outlet.
3 The ON indicator on the battery charger will illuminate. The battery charger
does not have a power switch. (See Figure 3-30.)
Figure 3-30 ON Indicator
4 As the battery charger performs a self-test, all the indicators will turn amber.
5 The indicators for the empty receptacles will then turn green. If a receptacle
contains a battery, its indicator will turn red.
6 All lights except for the ON indicator will extinguish. No further warm-up is
required; it is ready to charge batteries.
3.3.3 Loading the Battery Charger
The battery charger receptacles are identical and batteries in any state of charge
can be loaded.
1 Place the discharged battery into one of the charging receptacles.
(See Figure 3-31.)
Figure 3-31 Placing Battery into Charging Receptacle
To Next Page
Loading...
