9 - 16
HAPSITE ER Operating Manual
2 Once you are satisfied with the quality of the tune, click Save Tune at the top
right of the Percentages table. Save the tune as default.tun. (See Figure 9-30.)
Figure 9-30 Save Tune
3 Close Manual Tune.
9.4.8 Tool Bar
Each Manual Tune toolbar icon is described below.
Figure 9-31 Manual Tune Tool Bar
Filament On/Off. . . . . . . . . . Turns the emission on or off.
Multiplier On/Off . . . . . . . . . Turns the electron multiplier on or off.
Full Scan . . . . . . . . . . . . . . . Switches between displaying full scan
display mode and peak scan (single peak)
display mode.
Zoom . . . . . . . . . . . . . . . . . . Enables the cursor to select and zoom in on
a section of the screen.
Mass Adjust. . . . . . . . . . . . . Enables the cursor to select and drag a mass
peak to a different position on the mass axis.
AutoTune . . . . . . . . . . . . . . Starts the AutoTune function.
To Next Page
Loading...
