Inficon HAPSITE ER - Laptop Operation; Chapter 6 Sampling Procedure

6 - 1
HAPSITE ER Operating Manual
Chapter 6
Laptop Operation
6.1 Laptop Operation
NOTE: See Chapter 7, ER IQ Software for additional information on the ER IQ
software installed on the laptop computer.
6.1.1 Sampling Procedure
1 For assembly instructions, refer to section 3.2, Basic Assembly, on page 3-5.
2 Press the POWER button on the front panel to turn on HAPSITE ER. HAPSITE
takes 1-2 minutes to boot. (See Figure 6-1.)
Figure 6-1 POWER Button
NOTE: If desired and equipped, HAPSITE can be used with the laptop
computer via the wireless connection. Refer to Chapter 5,
Communications and Touch Screen Options for additional information
on set-up and usage.
3 Locate the power cord and mouse (optional). Plug them into the appropriate
ports on the computer. Open the laptop and press the power button.