10 - 29
HAPSITE ER Operating Manual
10.9.2 SIM for Survey
Figure 10-32 SIM for Survey
The SIM page for Survey mode provides the ability to create only one scan set.
Refer to Figure 10-32.
Scan Set Name . . . . . . . . . . . . . . . . References the specific set of ions being
detected.
Timed Mode . . . . . . . . . . . . . . . . . . The Survey method will run for a
programmed amount of time.
Trigger Mode. . . . . . . . . . . . . . . . . . The method will stop when the STOP button
or SURVEY RUN button is selected.
Scans to Average . . . . . . . . . . . . . . Determines the number of scans that will be
collected and averaged before the results are
displayed on the chromatogram.
To Next Page
Loading...
