11 - 28
HAPSITE ER Operating Manual
12 If the compound is not part of the calibration library, it is necessary to use
AMDIS (refer to Analyzing Data Using AMDIS, see section 8.5 on page 8-16)
or NIST (NIST Library Searches, see section 8.6 on page 8-24) to make an
identification. (See Figure 11-70.)
Figure 11-70 Unidentified Compounds
11.6 Definition of Terms in the ID Unknowns Window
Figure 11-71 ID Unknowns Window
11.6.1 Method
Browse . . . . . . . . . . . . . . . . . . . . . . Allows the user to select a method for
calibration.
View/Edit . . . . . . . . . . . . . . . . . . . . . Opens the Method Editor for the method
that is currently being calibrated. See
Chapter 10, Method Editor.
Save . . . . . . . . . . . . . . . . . . . . . . . . . Saves the current method.
Libraries . . . . . . . . . . . . . . . . . . . . . A drop-down menu that allows the user to
select a previously saved library.
Save Library . . . . . . . . . . . . . . . . . . Brings up the dialog box to save the library.
To Next Page
Loading...
