4 - 59
HAPSITE ER Operating Manual
The Headspace Sampling System icon will appear when it is attached to the
HAPSITE ER. Touching the HSS or SituProbe icon will display the information
regarding the firmware version and accessory’s heaters. See the Headspace
Sampling System and SituProbe Purge and/or Trap Sampling Systems’ manuals
for further information.
4.7.3 Info
The info option on the STATUS Menu will access the NIOSH Database screen. It
is equivalent to touching the info icon.
4.8 EXIT Menu
The EXIT menu is located on the top row of the front panel. (See Figure 4-101.)
This option will access Turn Off, Reboot or Standby. Turn off will shut down the
HAPSITE ER’s power. Reboot will reset the microprocessor in HAPSITE ER and
reload the drivers. It will also restart the operating system, HAPSITE ER program
and the front panel program. The Standby option will put the system into Extended
Standby. Refer to section 4.8.1 on page 4-61 for Extended Standby instructions.
1 Touch EXIT. Alternately, use the arrow keys to highlight EXIT and push OK
SEL. (See Figure 4-101.)
Figure 4-101 Exit Menu
To Next Page
Loading...
