8 - 22
HAPSITE ER Operating Manual
8.5.3 Confirm Screen in AMDIS
The Confirm function in AMDIS allows for unidentified peaks to be located by
AMDIS and export them to NIST for identification. See below for instructions on
using Confirm.
1 Click the Confirm button. (See Figure 8-44.)
Figure 8-44 Confirm button
2 The Confirm page will be displayed. An arrow located above the peak
indicates that a compound has been found. A T over the arrow indicates that
the compound has been identified by AMDIS. (See Figure 8-45.)
Figure 8-45 Confirm page
To Next Page
Loading...
