Inficon HAPSITE ER - Changing the Default Method

4 - 16
HAPSITE ER Operating Manual
4.2.1 Changing the Default Method
The default method for HAPSITE ER can be changed. By changing the default
method, HAPSITE ER will prepare the newly selected method upon startup.
1 Touch SELECT METHOD. (See Figure 4-27.)
Figure 4-27 Select Method
2 Highlight the desired method. (See Figure 4-28.)
Figure 4-28 Choosing Method
3 Touch the Set Default button. Upon the next startup, HAPSITE ER will begin
preparing the new default method.