4 - 15
HAPSITE ER Operating Manual
5 The PREPARING message will again be displayed. (See Figure 4-25.) Refer
to steps 4-9 of section 4.2, Selecting a Different Method Using the SELECT
METHOD Icon, on page 4-13 for further instructions on system preparation.
Figure 4-25 Preparing System
6 If the SYSTEM READY, ANALYZE READY or SURVEY READY message is
already displayed and the prepared method is not the desired one, touch
SELECT METHOD. (See Figure 4-26.)
Figure 4-26 Selecting New Method
7 Scroll up and down with the scroll bar or use the arrow keys to highlight the
desired method, as shown in Step 4 of section 4.2. Touch Select or highlight
Select using the arrow keys and push OK SEL.
8 HAPSITE ER will begin preparing the new method. Refer to Steps 4-9 of
section 4.2, Selecting a Different Method Using the SELECT METHOD Icon,
on page 4-13 for further instructions on system preparation.
To Next Page
Loading...
