Inficon HAPSITE ER - Peak Search Parameters; NIST Search Setup

8 - 33
HAPSITE ER Operating Manual
8.7.0.2 Peak Search Parameters
Some of the parameters for peak searching can be selected. These include the Min
RIC Area, Min TIC Area, the Min and Max Width, the mass range, the Net fit, the
NIST library used for identification and the number of identifications that are
displayed by the NIST library.
Library Name . . . . . . . . . . . . . . . . . The selected library will be used to make
AMDIS identifications.
Maximum NIST Hits . . . . . . . . . . . . NIST will display the setpoint number of
identifications.
8.7.0.3 NIST Search Setup
If NIST is reloaded onto the laptop, the library pathway may need to be reset.
If the libraries have properly loaded, the pathways will be set to folders displayed
in Figure 8-64.
Figure 8-64 NIST Main Library
To reset the NIST Main Library:
1 Click Browse.... (See Figure 8-65.)
Figure 8-65 Browse...