Inficon HAPSITE ER - Date and Time Appendix

10 - 61
HAPSITE ER Operating Manual
Figure 10-81 Use Default Filename
File increment digits . . . . . . . . . . . Sets the number of digits appended to the
data file name. By default, File Increment
Digits is set to three digits.
10.11.2 Date and Time Appendix
If desired, the data and time can be added to the data file name using the following
options.
None . . . . . . . . . . . . . . . . . . . . . . . . A date and time will not be added to the file
name. See Figure 10-82.
Figure 10-82 Date and Time Appendix- None Selected
Date Only . . . . . . . . . . . . . . . . . . . . The date will add be added to the filename.
See Figure 10-83.
 yyyy is the year the data was collected
 mm is the month the data was collected
 dd is the day the data was collected
Figure 10-83 Date Only