4 - 6
HAPSITE ER Operating Manual
4.1.1 Emergency Mode (EMER MODE)
In an emergency, the concentrator cleanout can be bypassed to allow for faster
startup. This is not recommended for everyday use. While Emergency Mode is
active, the concentrator cleanout will continue to be skipped until Emergency Mode
is exited. To place the system into Emergency Mode:
1 Touch EMER MODE while the PREPARING SYSTEM message is displayed.
(See Figure 4-9.)
Figure 4-9 Emergency Mode
2 Alternately, use the arrow keys to highlight the EMER MODE button and push
OK SEL. (See Figure 4-10.)
Figure 4-10 Arrow Keys
To Next Page
Loading...
