10 - 3
HAPSITE ER Operating Manual
2 If more than one unit is connected to the laptop, click on the name of the
desired HAPSITE ER. See Figure 10-3.
Figure 10-3 Method Editor Open Window
There are four options for accessing a method:
Open . . . . . . . . . . . . . . . . . . . . . . . . Opens an existing HAPSITE method for
modification.
Method . . . . . . . . . . . . . . . . . . . . . . Opens a blank method template to modify as
necessary.
Method Sequence . . . . . . . . . . . . . Allows a method to be automatically
repeated or a series of methods to be run
together. See Method Sequence, see section
10.13 on page 10-64.
Default Method . . . . . . . . . . . . . . . . Selects a default method. See Loading
Default Methods, see section 10.2.1 on page
10-3.
Cancel . . . . . . . . . . . . . . . . . . . . . . . Closes the Edit Method window.
10.2 Reloading Default HAPSITE Methods
Default methods can be loaded onto the laptop in case the methods have been
deleted or modified.
10.2.1 Loading Default Methods
1 Double-click the Method Editor icon.
Figure 10-4 Method Editor
To Next Page
Loading...
