Inficon HAPSITE ER - Setting up a Quantitative Search

10 - 43
HAPSITE ER Operating Manual
Every ____ min:sec . . . . . . . . . . . . Determines the time intervals for running an
AMDIS search.
End of Run . . . . . . . . . . . . . . . . . . . An AMDIS search will only be conducted at
the end of a run.
10.10.2 Setting Up a Quantitative Search
Once a calibration library has been created, the Library Search Parameters
button will be activated. The Library Search Parameters functions sets the peak
identification criteria of the library compounds, as well as the unknown analytes.
See Figure 10-49.
Figure 10-49 Library Search Parameters Button